|Dual Motor Low Voltage Control System : Specifications|
- Low Voltage Switch Control
- Radio Frequency Remote Control
- Infrared Remote Control
- Auxiliary Control
The Dual Motor Controller System consists of a printed circuit board with the microcomputer, relays and a transformer. The control components are housed in a metal electrical box. It is possible to control the screen from any number of 3-button switches, or computer controls. An infrared remote and a radio frequency remote can be added as control options. The low voltage 3-button switch utilizes 12 volts DC to operate the standards. The overall housing size is: 4 1/4" x 6" x 8 1/4".
The Switch Control, complete with a painted cover plate, may be flush mounted on any wall in a standard single gang electrical box. The 3-button Switch Control allows you to move the screen, screen mask or video projector lift up or down and stop at any position when you momentarily press either the UP, DOWN or STOP buttons as instructed.
- Typical range is 75'
- Radio receiver plugs right into the DMC unit.
- Typical range is 50'
- Infrared sensor plugs right into the DMC unit.
When Ordering Make Appropriate Selections:
- Suggested Specifications:
Electrical rating 115 VAC 60 Hz 10A. The dual motor LVC is used to operate the Da-Lite Dual Masking ElectrolŽ Screen or a single motor screen and a projector lift together from one or more locations, remote control, or for integration into a control panel system. Operated by a 3-button momentary dry contact switch. Connections, including 115 volt input, switch input and motor output, to control board provided by screw terminal blocks. Any combination of single or multiple 3-button switches, optional radio frequency remote or infrared remote, or a control panel with momentary dry contacts may control unit. Control board to be mounted in a painted steel housing measuring 4" H x 6" W x 8" L. Standard knockouts provided on housing for conduit connections. Control to be listed by Underwriter's Laboratories. NOTE: This control cannot be used with the Horizon ElectrolŽ, Ascender ElectrolŽ, or Motorized Scenic Roller screens.
- Radio Frequency Remote Control.
- Infrared Remote Control.
- Additional 3-button Wall Switch.
- 240V Model Available.
- Key Locking Coverplate for 120 V Switch or LVC.