Products
| Integrated Screen Control : Specifications |
When Ordering Make Appropriate Selections:
- Suggested Specifications:
The Serial Control Board SCB-100 allows for control over a screen using RS-232C communication and/or
relay closures. Can be used to control most 100VAC-240VAC screens or projector lift. Electrical requirements are 100-240VAC 50-60HZ
10 Amp. I/O ports include 2 motor connections to operate 1 or 2 single motor screens, a screen and projector lift or a masking screen
with 2 motors. Connections provided by 6" wire leads. Two RS-232 ports for connection to the optional Da-Lite NET-100 Ethernet-
Serial Adaptor and/or a third party control system. Ports 1 and 2 can control either motor 1 or 2. Connections provided by captive screw
terminals.
Two dry contact closure (no voltage input) ports for connection of multiple low voltage wall switches or a third party control device with
dry contact closure. Port 1 controls motor 1 only, port 2 controls motor 2 only. Connections provided by captive screw terminals.
One 12VDC output for supply to the optional Da-Lite NET-100 Ethernet-Serial Adaptor. Connections provided by captive screw
terminals.
6" wire leads provided for 100VAC-240VAC input.
The outer housing is made of galvanized steel with a removable cover for easy access to connections. The housing base includes four
7/8" diameter knockouts for connection of 1/2" conduit and screw mounting holes to secure the SCB-100 to most surfaces.
The SCB-100 can be built-in to the Contour, Advantage, Advantage Deluxe and Director series screens. This will add an additional
3-3/4" to the Contour, and 10" to the Advantage screen case. The Advantage Deluxe and Director cases do not change length.
Note: The SCB-100 cannot be used to control the Da-Lite Horizon, Tensioned Horizon, Ascender and Motorized Scenic Roller screens.
