Discover the Difference

Products

Advance PIXMobile® AV1 and AV2 Specification Data Sheet (221.1kb)

When Ordering Make Appropriate Selections:

1. Suggested Specifications:
   1. MATERIALS: A. Shelves: Class 1, cold rolled carbon steel, commercial quality. Thickness: Standard gauge number – 20, (.0359”) Shape & Size: As specified by model number. Side flanges: each side roll-formed. 2.00” overall height. 0.31” deep by 0.25” curl on all four sides of the bottom edge. Safety lip: 0.50” tall lip around all sides of all shelves. Reinforcement: The top shelves of series 5, 6, 7, & 8 are reinforced with a 0.50” tall x 3.00” wide, hat-shaped, steel member welded to underside of shelf at each end. B. Legs: Class 1, cold rolled carbon steel, commercial quality. Thickness: Standard gauge number – 16, (.059”). Shape: Roll formed into a 90-degree angle cross section with the corner rounded at 0.88” outside radius. The shape is symmetrical with 0.81” of flat material on each edge. C. Caster sockets: Carbon steel, split, die-formed, bushing standard gauge number 13 (.090”) thick, inside diameter – 0.450”. D. Casters: Wheel: Rubberex (non-marking) 0.938” width Load Capacity per set of four casters. 4.00” diameter – 460 lbs. 5.00” diameter – 500 lbs. Brakes: Two per stand, friction, toe operated. Axle: Steel, 0.312” diameter, self-lubricating. Stem: 0.438” diameter steel with brass friction retention ring. Length 1.50”. Provided with .06” width O-ring groove. Double race, ball bearing swivel, with shimmy dampener. Rubber O-ring: Two aircraft quality provided for each caster stem. E. Ribbed rubber mat: Provided for the top shelf. F. Finish: Surface preparation: Power washed, iron phosphate coating with sealing agent. Finish coat: Powder coat finish Color: Black or Gray 2. CONSTRUCTION: Number and size of shelves as specified by model number. Shelves to be joined to the legs by means of robotic arc welding. (AV Series) Shelf to be welded to the legs twice at each corner. Each weld a minimum of 1.75” long. Reinforcements (series 5,6,7 and 8 only): electrical resistance welded. Caster socket robotically arc welded to the legs. 1.50” long weld on each side of each socket. 3. LOAD CAPACITY of table: 10,000 lbs. static load without casters in place. (100% safety factor) Recommended maximum operation loads on a set of four casters. 4.00” diameter – 460 lbs. 5.00” diameter – 500 lbs.